This Reference Article has been written for Version 2.1 of the DATAFLOW Software. For Previous Releases use the version selection in the navigation bar at the top of this page.
The Project Settings contain all settings for a single project inside a DATAFLOW Solution. These settings will stored inside the solution and will be the same for all users.
Note: When a user changes any project setting, this will affect all other users of the same project.
Open Project Settings Dialog
The Dialog to edit the Project Settings can be shown in the following ways:
Press Ctrl + Alt + L on the Keyboard
Select 'Project settings' from the Project context menu shown when the Project entry is right clicked in the Explorer Window.
Note: The Project Setting dialog is always opened for the current project. This is determined by the current editor opened in the DATAFLOW Designer.
|The Dialog can be closed by pressing the ESC key on the keyboard, the Cancel button or the Cross Button in the top right corner. This will discard all changes.|
|The Confirm button will save all changes and close the dialog.|
The Apply button will save all changes, but the dialog will not be closed.
The Show Manual button will open the Knowledge Base Article for the current page in the default web browser.
Project Setting Pages
The dialog is organized in pages.
The following pages are shown for a System or Component Project:
For a Library project, the available pages are limited to:
Required Module: DATAFLOW Studio
This Article has been written based on V2.1.1 of the DATAFLOW software.
Latest update 2023-03-27 by WUE.