This Guide Article has been written for Version 2.1 of the DATAFLOW Software. For Previous Releases use the version selection in the navigation bar at the top of this page.
The newest Windows installer for the DATAFLOW Designer software can be downloaded here:
The DATAFLOW Designer software requires one of the following operating systems with the latest updates:
- Windows 8.1
- Windows 10
DATAFLOW Designer runs on the 32- and 64-bit versions of those operating systems.
DATAFLOW Designer requires an Intel Core i5 or similar CPU and 2 GB of RAM. A core i7-4770 and 8 GB of RAM are recommended.
Run the DATAFLOW Installer to install the DATAFLOW Designer and DATAFLOW Simulator on your Windows OS.
Figure 1 - DATAFLOW Installer Welcome Dialog
Click the "Next" button to continue in the install menu.
Figure 2 - DATAFLOW Installer - Terms and Conditions Dialog
Define the installation location and agree to the Data Privacy and End User License Agreement.
Press "Install" to start the installation Process.
After a successful installation you will be presented a dialog to
- launch the DATAFLOW Designer and/or
- launch the DATAFLOW Simulator
- create Desktop Shortcuts
Figure 3 - Finish Installation Dialog
The installer will install the most recent version of DATAFLOW Designer on the target computer. It is also possible to select an older version if required (see Checkbox in the bottom of the dialog in figure 1) by the project (ask the project leader which version to use). Multiple major/minor versions of DATAFLOW Designer can be installed side by side if required for different projects.
This means that, for example, versions 1.4.1 and 1.3.3 can be installed side by side. An installation of version 1.4.2 will overwrite version 1.4.1 because both are located in the V 1.4 folder but will not alter the 1.3 installation.
Required Module: DATAFLOW Installer
This Article has been written based on V2.1.1 of the DATAFLOW software.
Latest update 2023-05-31 by WUM.