Preset Configuration Page (DATAFLOW Designer)
This Reference Article has been written for Version 2.1 of the DATAFLOW Software. For Previous Releases use the version selection in the navigation bar at the top of this page.
This Page is part of the Application Options dialog.
Page Description
The Preset Page is used to define initial values for created elements in the editor.
Page Actions
This page does not provide any special actions.
Page Groups
This page contains the following groups:
- System Design Defaults
- Hardware Channel Defaults
- Active Part Defaults
- Active Interrupt Defaults
- Active Container Defaults
- Software Channel Defaults
- Port Defaults
- Timer Defaults
- Data Type Defaults
System Design Defaults Group
| System Component Name | This name is used as initial name for any system component created. |
| Spacer Label | This text is used as initial label for any spacer created. This can be empty to crerate empty spacers by default. |
| Element Width | Initial with of all created element in system and software design. |
Hardware Channel Defaults Group
| Channel Label | Initial label for new hardware channels. This can be empty to crerate no label by default. |
| Sink/Source Label |
This text is used as initial label for any hardware source/sink created in the model by drag and drop from the toolbox. Note: When source/sink is created from an existing hardware channel, the label of the channel is used instead (if any). |
| Routing Mode |
This value defined the initial routing mode for any hardware channel that is created in any diagram. |
Active Part Defaults Group
| Name | This name is used as initial name for any active part created. |
| Implementation Type | This value defined the initial implementation type for any active part created. |
| Priority | This value is used as the initial priority for any active part created. |
| Stack Size | This value is used as the initial stack size for any active part created. |
| Time Slice | This value is used as the initial time slice for any active part created. |
| Core Affinity | This value is used as the initial core affinity type for any active part created. |
Note: Stack Size, Time Slice and Core Affinity are only used by certain DATAFLOW Runtime types for RTOS target platforms. This value should be left on the default value when no such runtime is used.
Active Interrupt Defaults Group
| Name | This name is used as initial name for any active interrupt created. |
| Interrupt Handler Name |
This name is used as initial name for the interrupt handler added to a new active interrupt. |
Active Container Defaults Group
| Name | This name is used as initial name for any active container created. |
Software Channel Defaults Group
| Routing Mode | This value defined the initial routing mode for any software channel that is created in any diagram. |
| Source/Sink Label |
This text is used as initial label for any source/sink created in the model by drag and drop from the toolbox. Note: When source/sink is created from an existing channel, the name of the assigned protocol is used instead. |
| Hide Terminator in Toolbox | When checked, the Terminator element is not shown in the Toolbox window. |
Ports Defaults Group
| Input Name | This name is used as initial name for any input port that is created in any diagram. |
| Output Name | This name is used as initial name for any output port that is created in any diagram. |
| Notifier Name |
This name is used as initial name for any notifier port that is created in any diagram. |
| Publisher Name |
This name is used as initial name for any publisher port that is created in any diagram. |
| Responsible Name |
This name is used as initial name for any responsible port that is created in any diagram. |
| Subscriber Name |
This name is used as initial name for any subscriber port that is created in any diagram. |
| Bus Name |
This name is used as initial name for any bus creator that is created in any diagram. |
| Bus Port Name |
This name is used as initial name for any bus port that is created in any diagram. |
Timer Defaults Group
| Oneshot Timer Name | This name is used as initial name for any oneshot timer that is created in any diagram. |
| Oneshot Timeout | This value is used as the initial timeout for any oneshot timer that is created in any diagram. |
| Periodic Timer Name | This name is used as initial name for any periodic timer that is created in any diagram. |
| Periodic Interval | This value is used as the initial interval for any periodic timer that is created in any diagram. |
| Autostart Peridoic Timer | When checked, any periodic timer created will be set to autostart by default. |
| Variable Timer Name | This name is used as initial name for any variable timer that is created in any diagram. |
| Hide Variable Timer in Toolbox | When checked, the variable timer element is not shown in the Toolbox window. |
Note: The DATAFLOW Designer will ensure unique component and element names in the model. When creating multiple elements in the same parent element, a number will be appended to the name above.
Data Type Defaults Group
| Enumeration Name | This name is used as initial name for any enumeration created. |
| Custom Type Name | This name is used as initial name for any custom type created. |
| Struct Name | This name is used as initial name for any struct created. |
| Protocol Name | This name is used as initial name for any protocol created. |
| Signal Name | This name is used as initial name for any signal created. |
| I/O Buffer Name |
This name is used as initial name for any I/O buffer created. |
| Type Group Name | This name is used as initial name for any type group created. |
Note: The DATAFLOW Designer will ensure unique names in the model. When creating multiple data types in the same type group, a number will be appended to the name above.
Required Module: DATAFLOW Designer
This Article has been written based on V2.1.1 of the DATAFLOW software.
Latest update 2023-06-02 by WUE.
Comments
0 comments
Please sign in to leave a comment.